dmesg - Falcon Northwest Tiki Arch64

Return To Falcon Northwest Tiki Arch64 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Aug 11 15:41:14 CEST 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd2d8fff] usable
BIOS-e820: [mem 0x00000000dd2d9000-0x00000000dd631fff] reserved
BIOS-e820: [mem 0x00000000dd632000-0x00000000dd641fff] ACPI data
BIOS-e820: [mem 0x00000000dd642000-0x00000000dd768fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd769000-0x00000000de7d8fff] reserved
BIOS-e820: [mem 0x00000000de7d9000-0x00000000de7d9fff] usable
BIOS-e820: [mem 0x00000000de7da000-0x00000000de81cfff] ACPI NVS
BIOS-e820: [mem 0x00000000de81d000-0x00000000dec4ffff] usable
BIOS-e820: [mem 0x00000000dec50000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/P8Z77-I DELUXE, BIOS 1201 06/20/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask E00000000 write-back
  1 base 200000000 mask FE0000000 write-back
  2 base 0E0000000 mask FE0000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7a0-0x000fd7af] mapped at [ffff8800000fd7a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01b2f000, 0x01b2ffff] PGTABLE
BRK [0x01b30000, 0x01b30fff] PGTABLE
BRK [0x01b31000, 0x01b31fff] PGTABLE
init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
 [mem 0x21fe00000-0x21fffffff] page 2M
BRK [0x01b32000, 0x01b32fff] PGTABLE
init_memory_mapping: [mem 0x200000000-0x21fdfffff]
 [mem 0x200000000-0x21fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdd2d8fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xdd1fffff] page 2M
 [mem 0xdd200000-0xdd2d8fff] page 4k
init_memory_mapping: [mem 0xde7d9000-0xde7d9fff]
 [mem 0xde7d9000-0xde7d9fff] page 4k
BRK [0x01b33000, 0x01b33fff] PGTABLE
init_memory_mapping: [mem 0xde81d000-0xdec4ffff]
 [mem 0xde81d000-0xde9fffff] page 4k
 [mem 0xdea00000-0xdebfffff] page 2M
 [mem 0xdec00000-0xdec4ffff] page 4k
BRK [0x01b34000, 0x01b34fff] PGTABLE
init_memory_mapping: [mem 0xdeff4000-0xdeffffff]
 [mem 0xdeff4000-0xdeffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
 [mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x37930000-0x37c8ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD635078 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DD63FE68 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000DD635170 00ACF5 (v02 ALASKA A M I    00000022 INTL 20051117)
ACPI: FACS 0x00000000DD767080 000040
ACPI: APIC 0x00000000DD63FF78 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DD640010 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000DD640058 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HPET 0x00000000DD640098 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DD6400D0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DD640E48 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: SSDT 0x00000000DD640498 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
NODE_DATA(0) allocated [mem 0x21fff2000-0x21fff5fff]
 [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000021fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x00000000dd2d8fff]
  node   0: [mem 0x00000000de7d9000-0x00000000de7d9fff]
  node   0: [mem 0x00000000de81d000-0x00000000dec4ffff]
  node   0: [mem 0x00000000deff4000-0x00000000deffffff]
  node   0: [mem 0x0000000100000000-0x000000021fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
On node 0 totalpages: 2086581
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 14109 pages used for memmap
  DMA32 zone: 902937 pages, LIFO batch:31
  Normal zone: 18432 pages used for memmap
  Normal zone: 1179648 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd2d9000-0xdd631fff]
PM: Registered nosave memory: [mem 0xdd632000-0xdd641fff]
PM: Registered nosave memory: [mem 0xdd642000-0xdd768fff]
PM: Registered nosave memory: [mem 0xdd769000-0xde7d8fff]
PM: Registered nosave memory: [mem 0xde7da000-0xde81cfff]
PM: Registered nosave memory: [mem 0xdec50000-0xdeff3fff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88021fc00000 s95576 r8192 d31400 u262144
pcpu-alloc: s95576 r8192 d31400 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2053955
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8132820K/8346324K available (5699K kernel code, 893K rwdata, 1732K rodata, 1180K init, 1152K bss, 213504K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3491.884 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6986.75 BogoMIPS (lpj=11639613)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a08000 - ffffffff81a0d000)
ftrace: allocating 21563 entries in 85 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (fam: 06, model: 3a, stepping: 09)
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (55892.06 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdd642000-0xdd768fff] (1208320 bytes)
PM: Registering ACPI NVS region [mem 0xde7da000-0xde81cfff] (274432 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 11:59:52, date: 08/22/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880215E5B000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880215E3A400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880215E31800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7320000-0xf732ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7300000-0xf731ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7339000-0xf7339fff]
pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7338000-0xf73383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7330000-0xf7333fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7337000-0xf73373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7336000-0xf73367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7335000-0xf73350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:01:00.0: [10de:1180] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [14e4:4359] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf7200000-0xf7203fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 03]
pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 04]
pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd2d9000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde7da000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec50000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0x1000-0x100f] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0x0400-0x0453] could not be reserved
system 00:01: [io  0x0458-0x047f] has been reserved
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io  0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xe0000000-0xe0000fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.6: PCI bridge to [bus 03]
pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.7: PCI bridge to [bus 04]
pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 3456K (ffff880037930000 - ffff880037c90000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd92d9000-0xdd2d9000] (64MB) mapped at [ffff8800d92d9000-ffff8800dd2d8fff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x17
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90001000000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
  Magic number: 11:274:985
rtc_cmos 00:02: setting system clock to 2015-08-22 11:59:53 UTC (1440244793)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1180K (ffffffff818e1000 - ffffffff81a08000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 432K (ffff880001594000 - ffff880001600000)
Freeing unused kernel memory: 316K (ffff8800017b1000 - ffff880001800000)
random: systemd-tmpfile urandom read with 1 bits of entropy available
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7338000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7337000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7336000 port 0xf7336100 irq 26
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7336000 port 0xf7336200 irq 26
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7336000 port 0xf7336300 irq 26
ata6: SATA max UDMA/133 abar m2048@0xf7336000 port 0xf7336380 irq 26
xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8802170c7078), AE_NOT_FOUND (20150410/psparse-536)
ata1.00: ATA-9: M4-CT256M4SSD2, 040H, max UDMA/100
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8802170c7078), AE_NOT_FOUND (20150410/psparse-536)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      M4-CT256M4SSD2   040H PQ: 0 ANSI: 5
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8802170c7168), AE_NOT_FOUND (20150410/psparse-536)
ata3.00: ATAPI: Optiarc DVD RW AD-7800H, 1.00, max UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150410/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff8802170c7168), AE_NOT_FOUND (20150410/psparse-536)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7800H  1.00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-3: new full-speed USB device number 2 using xhci_hcd
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 5-2: new low-speed USB device number 2 using xhci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
raid6: sse2x1   gen()  6624 MB/s
raid6: sse2x1   xor()  6583 MB/s
usb 3-3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
raid6: sse2x2   gen() 11173 MB/s
usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
raid6: sse2x2   xor()  9035 MB/s
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:0764:0501.0001: hiddev0,hidraw0: USB HID v1.10 Device [CPS UPS CP1000AVRLCD] on usb-0000:04:00.0-2/input0
raid6: sse2x4   gen() 12755 MB/s
usb 1-1.5: new full-speed USB device number 3 using ehci-pci
raid6: sse2x4   xor() 11548 MB/s
raid6: using algorithm sse2x4 gen() 12755 MB/s
raid6: .... xor() 11548 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
   avx       : 28887.600 MB/sec
Btrfs loaded
BTRFS: device fsid 760b2a66-8638-46eb-86cc-82066e15f401 devid 1 transid 47545 /dev/sda3
BTRFS info (device sda3): disk space caching is enabled
BTRFS: has skinny extents
usb 3-3.1: new low-speed USB device number 3 using xhci_hcd
BTRFS: detected SSD devices, enabling SSD mode
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
usb 3-3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
systemd[1]: systemd 224 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
input: Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/0003:046D:C221.0002/input/input2
tsc: Refined TSC clocksource calibration: 3492.067 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x32560b09237, max_idle_ns: 440795350722 ns
systemd[1]: Created slice Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-dhcpcd.slice.
systemd[1]: Created slice system-dropbox.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Set up automount home-joe-crypt.automount.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Set up automount home-joe-nas.automount.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
hid-generic 0003:046D:C221.0002: input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:14.0-3.1/input0
systemd[1]: Starting Cryptography Setup for joecrypt...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting Temporary Directory...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting Configuration File System...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 213 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
input: Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:046D:C221.0003/input/input3
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted Debug File System.
BTRFS info (device sda3): disk space caching is enabled
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Started Set Up Additional Binary Formats.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started udev Coldplug all Devices.
hid-generic 0003:046D:C221.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:14.0-3.1/input1
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Reached target Local File Systems.
NET: Registered protocol family 38
AVX2 instructions are not detected.
systemd[1]: Started Journal Service.
systemd-journald[212]: Received request to flush runtime journal from PID 1
usb 3-3.2: new low-speed USB device number 4 using xhci_hcd
EDAC MC: Ver: 3.0.0
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
wmi: Mapper loaded
PTP clock support registered
ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
Adding 8388604k swap on /dev/sda2.  Priority:-1 extents:1 across:8388604k SSFS
input: PC Speaker as /devices/platform/pcspkr/input/input6
[drm] Initialized drm 1.1.0 20060810
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
iTCO_vendor_support: vendor-support=0
cfg80211: Calling CRDA to update world regulatory domain
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
asus_wmi: Disabling ACPI video driver
usb 3-3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:045E:00CB.0004/input/input9
hid-generic 0003:045E:00CB.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:14.0-3.2/input0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
wl: disagrees about version of symbol module_layout
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  352.30  Tue Jul 21 18:53:45 PDT 2015
loop: module loaded
usb 3-3.4: new full-speed USB device number 5 using xhci_hcd
FAT-fs (dm-0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
input: G11 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/0003:046D:C225.0005/input/input10
hid-generic 0003:046D:C225.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G11 Keyboard] on usb-0000:00:14.0-3.4/input0
mousedev: PS/2 mouse device common for all mice
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM20702A1 (001.002.014) build 1348
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17b5.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17b5.hcd not found
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:bf:48:7f:62:49
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
e1000e 0000:00:19.0 eno1: renamed from eth0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
Switched to clocksource tsc
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 11
cfg80211: Calling CRDA to update world regulatory domain
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
random: nonblocking pool is initialized
fuse init (API version 7.23)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
perf interrupt took too long (2518 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
file-roller[8866]: segfault at 48 ip 000000000041a268 sp 00007ffc7a73aa50 error 4 in file-roller[400000+74000]
sr 2:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#0 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#0 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#11 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#11 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#11 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#11 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#23 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#23 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#23 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#23 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#20 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#20 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#20 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#27 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#27 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#27 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#27 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#15 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#15 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#15 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#15 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#27 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#27 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#27 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#27 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#8 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#8 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#8 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#8 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#14 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#14 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#14 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#14 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#11 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#11 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#11 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#11 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] tag#22 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sr 2:0:0:0: [sr0] tag#22 Sense Key : 0x2 [current] 
sr 2:0:0:0: [sr0] tag#22 ASC=0x3a ASCQ=0x2 
sr 2:0:0:0: [sr0] tag#22 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sr0, sector 0
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
sr 2:0:0:0: [sr0] unaligned transfer
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 53
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 48
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 57
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 54

Return To Falcon Northwest Tiki Arch64 System Information